Russell Hobbs RHEM30G, Инструкции и гарантия

Страница: 15 / 71

15
The following example shows the steps to set up a program multi-stage cooking programme.
Some recipes may require setting a multi-stage program involving defrosting as well as different
microwave power levels.
I
N
M
ULTI
S
TAGE
C
OOKING
A maximum of two stages can be set. If one stage is defrosting, it should be inputted in at the
first stage. The alert tone will ring once after each stage and the next stage will begin. Note :
The auto menu cannot be set as a selection of multi-stage cooking.
Example: suppose you want to defrost food for 5 minutes, then cook with 80% microwave
power for 7 minutes. The steps are as follows:
1. Press TIME DEFROST twice and the LED screen will display dEF2.
2. Turn the control dial to adjust the defrost cycle time to 05:00 minutes.
3. Press MICROWAVE once.
The LED display will show “P100”.
4. Now turn the control dial to choose 80% microwave power. P80 will show on the LED
display.
5. Press START/ +30SEC/ CONFIRM to confirm this selection.
6. Turn the control dial to adjust the cooking cycle time to 07:00 minutes.
7. Finish your multi-stage selection by pressing the START/ +30SEC/ CONFIRM button to
start cooking.
A handy chime will sound once for the first selection where the defrosting time will begin
counting down. The chime will sound twice thereafter when the unit has entered the second
stage of cooking. Finally, the chime will sound five times to indicate the cooking cycle is
completed.
PRESET (DELAY START) FUNCTION
1.
Ensure that you have set the digital clock first. (Check “Setting the Digital Clock”)
2. Start by inputting the desired cooking program. Remember that two multi-stages can be