12
ATTACHING THE PORTA-FILTER TO THE BREW HEAD
a. Position the porta-filter underneath the brew head. Now attach the porta-filter by first moving
the retainer clip back into its original position.
b. Position the filter
handle so that the handle lines up with the open lock icon “
” on the unit
and so that it fits into the groove.
c. Now slowly turn the porta-filter to the right until the retention clip is aligned with the closed lock
symbol “
” on the unit.
PLACING THE CUP(S)
a. Pull out the adjustable cup holder (located underneath the milk frothing container) if you are
using a small “demitasse” cup to brew espresso.
b. Keep the adjustable cup holder inside its storage compartment if you are using a larger cup to
brew cappuccino/ latte.
CAUTION: when brewing cappuccino or latte, you will need to adjust the frothing tube lever in
order to position the froth milk dispensing tube inside the selected cup.
TURNING/ SWITCHING THE UNIT
“ON”
Make sure that the coffee maker is plugged into the appropriate power outlet.
Turn unit ON
“I”.
The three control panel lights will start flashing whilst the coffee maker is heating and until
the water reaches the perfect temperature. Once these lights turn to a solid/uninterrupted
state then the coffee maker is ready to use.
