8
BEFORE FIRST USE
1. Before using your appliance for the first time, take the coffee maker out of the box and take off
any protective wrappings. REMEMBER: DO NOT LEAVE PROTECTIVE PACKAGING LYING
AROUND, AS IT COULD BE DANGEROUS AROUND INFANTS.
2. Place the appliance on a dry, level surface.
3.
Please refer to the “PARTS DIAGRAM” section to familiarize yourself with the coffee maker
and identify all the parts.
4. Please make sure the unit is
switched OFF “0” by pressing the power button located on the
side of the unit. Make sure that it is unplugged from the electrical outlet.
5. First remove the water reservoir from the coffee maker. Now remove and discard the red
safety plug located on the water reservoir.
6. Wash the water reservoir, the milk frothing container, the porta-filter, the two crema filters and
measuring spoon in a mixture of mild detergent and water. Rinse each component thoroughly
and place them back into the unit.
7. Refer to the
“ATTACHING THE PORTA-FILTER TO THE BREW HEAD” section before
placing the porta-filter on or removing it from the unit.
8. To clean the inside of the appliance, follow the steps listed in
the “CLEANING AND
MAINTENANCE
” section. Do not immerse the appliance in water or attempt to reach any of
its internal parts.
NOTE:
In order for your appliance to work properly time after time, it must
be cleaned after every use.
9. Before first use, ensure that you prime the coffee maker.
OPERATING INSTRUCTIONS
IMPORTANT
– PRIME THE COFFEE MAKER
To make a cup of good hot coffee, we recommend that you pre-heat/ prime the appliance before
making coffee, including the cup, so that the coffee flavour is not influenced by the cold parts of the
coffee maker or a cold cup.
To prime the coffee maker, run the steam cycle for 90 seconds by following the steps below:
1. Fill the water reservoir with water
between the “MIN” and “MAX” levels.
2.
Fill the milk frothing container with water between the “MIN” and “MAX” levels.
