7
OPERATING INSTRUCTIONS
1. Place the motor base on a clean, dry, level surface such as a counter or table top.
2. Hold the 6-blade/whisk attachment by the shaft then place it onto the gear shaft inside
the jug.
3. Ensure that the attachment fits perfectly around the gear shaft and that it is standing
straight.
4. Ensure the unit is off before adding the ingredients and secure the lid onto the jug. Do
not exceed maximum level mark.
5. Place the jug onto the motor base.
6. Plug the power cord into the electrical outlet and select the speed to start the machine.
7.
Don’t remove the lid from the jug while the blender is ON.
8. Operate the preferred speed setting for
1 minute
.
9. Let the product and mixture cool down to room temperature before next usage.
10.
After using the blender, always move the switch into the ‘0’ setting and remove the
mains plug from the power outlet.
11. To remove the jug just turn it in an anti-clockwise direction and then lift it up.
Pulse Function
The pulse function will give you a short burst at maximum speed, regardless of the current
speed of the blades. The button is spring-loaded. When you stop pressing, it will return to the
speed the switch is pointing at.
Crushing Ice
Before using the blender to crush ice, make sure it is clean and rinse it out thoroughly. Any
remaining trace of detergent may affect the taste of the crushed ice and will flatten any drink to
which it has been added.
Ice cubes come in many shapes and sizes. You will have to experiment with the ice from your
ice cube tray. Insert a maximum of 8 ice cubes and add 15ml (1 tablespoon) of fresh cold
water. Put the lid on the blender and turn the control knob to “P”. While the unit is blending, hold
for 2 seconds and release for 2 seconds. Note that too much blending will reduce the ice to
