Russell Hobbs Rapidsteam RHC902, Инструкции и гарантия

Страница: 7 / 12

7
REDUCING TEMPERATURE
This can take time, as the iron has to lose the heat it has built up. It is best to organise your
ironing so that you do not need to reduce the temperature.
STEAM IRONING
When steam ironing, you must set the temperature control dial
above , to ensure the iron is in the steam temperature range.
Make sure the water tank is full.
• Move the steam control to the setting you want.
• Once the light switches off, you can commence ironing.
• The steam control is variable. Choose a position between
the no steam and
high steam that best suits your steam requirements.
NOTE: When steam ironing at the lower end of the steam
temperature range, it is preferable to set the steam control to a low
steam setting, in order to reduce the incidence of water droplets.
COOL SPRAY MIST
NOTE: Water spotting affects some fabrics. Test this out on a hidden part of the fabric first. The cool spray
mist works with dry or steam ironing, as long as there is water in the tank.
• Check that there is water in the tank.
• Lift the iron off the fabric.
• Aim the cool spray mist nozzle at the fabric.
• Press the
cool spray mist button – you may have to press it 2
or 3 times to pump water through the system.
BURST OF STEAM
Burst of steam works with both dry and steam ironing, as long as
there is water in the tank, and the temperature control dial is set
above .
• Check that there is water in the tank.
• Check that the temperature control dial is set above .
• Wait until the light switches off.
• Press the burst of steam button – you may have to press it 2
or 3 times to pump water through the system.
• Leave 3 seconds between bursts, to allow the iron
temperature to recover.
C
MAX
*
~
C
MAX
5
mark
max
S
temperature control
~
C
M
AX
C
MAX
C
MAX
C
C
MAX
*
~
C
MAX
5
mark
max
S
temperature control
~
C
M
AX
C
MAX
C
MAX
C
C
MAX
*
~
C
MAX
5
mark
max
S
temperature control
~
C
M
AX
C
MAX
C
MAX
C