Read the instructions carefully
as well as the safety guidelines before use.
1. GENERAL DESCRIPTION
A – Tongs
B – Led display: 4 temperature pos temperature locking
C – -/+ button to reduce/increase temperature
D – ON/OFF switch
E – Straightening plates
F – Rotating power cord outlet
G – Power supply cord
H – Lock System (to lock and unlock the tongs)
I – Thermo protect cap
2. SAFETY INSTRUCTIONS
• For your safety, this appliance complies with the applicable standards and regulations
(Low Voltage Directive, Electromagnetic Compatibility, Environmental…).
• The appliance’s accessories become very hot during use. Avoid contact with the skin.
Make sure that the supply cord never comes into contact with the hot parts of the
appliance.
• Check that the voltage of your electricity supply matches the voltage of your appliance.
Any error when connecting the appliance can cause irreparable harm, not covered by the
guarantee.
• For additional protection, the installation of a
residual current device (RDC) having a rated
residual operating current not exceeding 30 mA
is advisable in the electrical circuit supplying
the bathroom. Ask for installer for advice.
• The installation of the appliance and its use must however comply with the standards in
force in your country.
• WARNING: do not use this appliance near
bathtubs, showers, basins or other vessels
containing water.
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to ensure that they do not play
with the appliance.
• When the appliance is used in a bathroom,
unplug it after use since the proximity of water
presents a hazard even when the appliance is
switched off.
• This appliance can be used by children aged
from 8 years and above and persons with
reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they
have been given supervision or instruction
concerning use of the appliance in a safe way
and understand the hazards involved. Children
shall not play with the appliance. Cleaning and
user maintenance shall not be made by children
without supervision.
• If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid
a hazard.
• Stop using your appliance and contact an Authorised Service Centre if:
- your appliance has fallen.
- it does not work correctly.
• The appliance must be unplugged:
- before cleaning and maintenance procedures.
- if it is not working correctly.
- as soon as you have finished using it.
- if you leave the room, even momentarily.
• Do not use if the cord is damaged.
• Do not immerse or put under running water, even for cleaning purposes.
• Do not hold with damp hands.
• Do not hold the appliance by the casing, which is hot, but by the handle.
• Do not unplug by pulling on the cord, rather pull out by the plug.
• Do not use an electrical extension lead.
• Do not clean with abrasive or corrosive products.
• Do not use at temperatures below 0°C and above 35°C.
GUARANTEE
Your appliance is designed for use in the home only. It should not be used for professional
purposes. The guarantee becomes null and void in the case of improper usage.
3. BRINGING INTO SERVICE
1.
Lock System (fig. 1) : To open the clamps, pull the Lock System back. To lock the clamps:
close the clamps and push the "Lock System“ to the front.
2.
Plug in the appliance.
3.
Set the ON / OFF switch to position I. (D)
4.
Your appliance will heat up very quickly (ready to use in less than 30 seconds) and the
temperature will remain stable throughout use. (fig. 2)
5.
Select the ideal temperature for your hair using the -/+ buttons (fig. 3): press the – button
to reduce the temperature or the + button to increase it. The temperature indicator flashes
until the selected temperature is reached.
6.
After use: Place ON/OFF (D) switch in the stop position (0), close the clamps, use the
"Lock System", unplug the appliance and leave it to cool down completely before putting
it away.
Note:
To avoid any handling error (inadvertently pressing the +/- buttons during use)
this appliance is equipped with a locking function.
If you wish to lock your temperature setting during use, press the + or – button for 2
seconds. Your setting is being locked, a padlock appears on the screen.
If you wish to change your appliance’s temperature, you will need to unlock it by again
pressing the + or – button for 2 seconds. Your setting is being unlocked, the padlock
disappears from the screen. You can change the temperature by pressing the b/-.
4. USE
4.1 - How should you straighten your hair?
Hair must be untangled, clean and dry.
• Do not use the appliance on synthetic hair (wigs, extensions, etc.).
• Form a small lock a few centimetres in width, comb it and place it between the plates.
Hold the hair firmly between the plates and slide the appliance slowly from the roots to
the tip of the hair.
• The ceramic coating on the plates protects your hair against overheating by uniformly
spreading the heat.
• Wait for the smoothed hair to cool down before styling.
HAIRDRESSER’S TIPS
• Always start by smoothing the locks underneath. Work from the back of the neck first
before going onto the side of the head and finish with the front.
• To avoid streaks along the lengths, work using a smooth and uninterrupted move-
ment.
5. MAINTENANCE
CAUTION!
Always unplug your appliance and allow it to cool before cleaning it.
• To clean the appliance, unplug it and then wipe with a damp cloth and dry with a dry
cloth.
6. TROUBLESHOOTING
• You’re not happy with the results you’re getting from your straightener:
- Press the straightener plates more firmly against your hair section.
- Slide your straightener more slowly.
- Increase the temperature using the “+” button.
• It’s impossible to change the temperature?
- Check that the temperature level isn’t locked.
• The LED flashes with no indication.
- There is a fault in the appliance. Please take it to an officially approved service centre
• The plate isn’t static.
- This is quite normal, the straightener is fitted with a mobile plate to get better
results from your straightener.
ENVIRONMENT PROTECTION FIRST!
Your appliance contains valuable materials which can be recovered or
recycled.
Leave it at a local civic waste collection point.
These instructions are also available on our website
www.tefal.com.
www.tefal.com
1800135304
Respectissim 7/7
Beauty
EN
KO
EN
E
C
D
F
G
A
B
H
I
Fig. 1
Fig. 2
Fig. 3
1800135304_HS7420K0_A3 03/02/15 10:42 Page1
