background image

5

plug in
caution

  If you’ve accidentally pressed the suction control/on/off switch 

3

, the cleaner could 

come on when you plug it in. This could give you a bit of a start, so be careful.

18  Plug the cable into a socket near the area to be cleaned (switch the socket on, if it’s 

switchable).

switching on

19  Press and release the suction control/on/off switch 

3

, to turn the cleaner on.

cleaning

20 Move the tool over the surface, cleaning a small area at a time.
21 When you move to a new area, overlap the previous area, to make sure none of the surface is 

missed.

switching off

22 If you’ve finished, if you want to change tools, or if you just want to stop for a rest, press and 

release the suction control/on/off switch 

3

, to turn the cleaner off.

finished cleaning?

23 Press and release the suction control/on/off switch 

3

, to turn the cleaner off.

24 Unplug the cleaner (switch the socket off first, if it’s switchable).
25 Stand clear of the cable, and press the carrying handle down (

 C 

) – the cable will rewind.

26 Keep clear of the cable, as it rewinds at a fair lick. If it catches on anything, stop pressing, and 

it’ll stop rewinding.

27 We’ve tried not to make it too powerful, to avoid wrecking your home, so you may need to 

push the plug end into the storage area manually.

removing and emptying the bin

28 You don’t have to empty the bin after each use, but it’s a very good idea. Your cleaner will 

happily work till it’s chock full, but you’ll be wasting energy swirling yesterday’s dust around. 
Energy that could be better used sucking up today’s dust.

29 There’s a “bin full indicator” on top of the cleaner, between the carrying handle and the 

suction control/on/off switch.

30 If it shows red, when suction is at maximum, and the nozzle is off the floor, then you should 

empty the bin right away.

31 Switch off, unplug, and leave it for a minute, to let the dust settle.
32 Press in the lock on the hose end, and pull the hose out of the cleaner – this’ll keep the hose 

out of your way.

33 Grip the bin handle, press in the bin release buttons, and lift the bin up and out of the cleaner.
34 Lower the bin into your dustbin so the bottom of the bin is below the rim – this’ll prevent the 

dust dispersing into your environment.

35 Press the latch on the front of the bin, to open the bottom of the bin, and dump its contents 

into the dustbin.

36 Give the bin a couple of taps, to shake all the dirt loose. 
37 Lift the bottom of the bin up to close it.

check the filters

38 While emptying the bin, check the filters – especially the plastic filter. Blocked filters quickly 

reduce suction, and they’re easy to clean.

precautions

39 Spread out some newspaper – you’re likely to make a mess.

40 Wearing rubber gloves is a good idea – they’ll protect your fingers from any gunge on the 

filters.

Содержание Power Cyclonic 18378









Отзывы: