7
Allow your kettle to cool for a 25 minutes before refilling, to permit this device to
re-set.
Place the kettle on a dry work surface until it
is cold. Don‟t fill it unless is its cold,
or it may splatter
CLEANING AND MAINTENANCE
Always unplug the kettle at the mains, and leave to cool before cleaning.
Clean the outside with a damp cloth, and buff with a dry cloth. DO NOT USE
SCOURING POWDER, OR ANY OTHER CLEANING PRODUCTS AS THEY
MAY DISCOLOUR YOUR KETTLE.
Keep all connectors and sockets dry. Do not put kettle of power base in any
liquid.
There are various kettle cleaners/kettle descalers, that remove scaling and
markings, which are available from supermarkets, chemists and other stores.
This appliance is for household use only and is not user-serviceable.
Do not open or change any parts by yourself. Please refer to a qualified electrical
service department or return to the supplier if servicing is necessary.
It is much easier to clean the accessories directly after they have been used.
Wash them in warm, soapy water, rinse and dry well.
The body of the appliance and the stand should be cleaned with a damp cloth.
Do not let water enter the appliance or the stand.
Do not use bleach or other abrasive substance or solvents to clean your
appliance as it can be damaging to the finish.
Do not immerse the appliance in water or any other liquid, or hold it under a
running tap to clean.
To remove stubborn spots/marks, wipe the surfaces with a cloth slightly
dampened in soapy water or mild non-abrasive cleaner. Rinse and dry a clean,
dry, soft cloth.
MINIMISE SCALE BUILD-UP
In hard water areas, it is necessary to remove scale and water deposit markings
in the kettle Scale deposits may be white, colored, or even rusty. They overheat
the element, reduce its working life, and make the boil-dry cut-out operate
