Russell Hobbs Colour Control Pro 2400W, Инструкция по эксплуатации

Страница: 6 / 8

6
AFTER USE
1. Unplug the iron.
2. Open the water inlet cover.
3. Turn the iron upside down over a sink, and drain the reservoir.
4. Close the water inlet cover, and wipe off any moisture.
5. Sit the iron on its heel till it’s cold.
6. Wipe outer surfaces with a damp cloth.
7.
Remove spots from the soleplate with a little vinegar.
8. Store the iron on its heel, to avoid corrosion.
SELF CLEAN
To reduce scale build-up, use the self clean function at least monthly in normal water areas,
more often in hard water areas.
You’ll need a basin or a large bowl to catch the water coming out of the soleplate.
1. Fill the reservoir to the max mark.
2. Sit the iron on its heel.
3. Put the plug into the power socket.
4. Set the temperature to max (red), and wait till the temperature light stops flashing.
5. Now hold the iron over the basin or bowl, with the soleplate down.
6. Press the
C
button and hold it down.
7. Gently move the iron to and fro, over the basin or bowl.
8. Water and steam will wash scale and dust through the soleplate.
9. When the reservoir is empty, release the
C
button.
10. Unplug the iron, and sit it on its heel to cool.
ANTI-SCALE
The anti-scale agent incorporated in the iron helps prevent the build-up of scale.
Don’t use a descaling solution, or you’ll destroy the anti-scale agent.