Russell Hobbs 9322219030083, Инструкции и гарантия

Страница: 8 / 12

8
TROUBLESHOOTING
Problem Possible Cause Solution
The steamer is plugged in but not
heating.
The auto shut-off has
activated. Press the steam trigger or
press the power button to
activate the steamer.
Not enough steam or no steam is
coming out of the steamer.
The steamer is not heated to
full temperature. Always allow steamer to
preheat at least 45 seconds,
or until the power button light
stops flashing.
There is not enough water in
the water tank. Fill the water tank.
The water pump hasn’t been
primed. After preheating, always prime
the water pump by holding
the steam trigger until steam
forms.
Discoloured water is coming
through the holes and staining
the fabric.
Residue has built up in the
water tank. Empty the water tank after
each use. Only use distilled,
filtered, or purified water.
Perfumed or scented additives
were used. Never use perfumed or
scented additives.
Steamer is leaking or spitting.
Steamer is not hot enough. Allow the steamer to heat for
about 45 seconds.
Water tank is running low. Fill the water tank.
DISPOSAL/RECYCLING
Legislation in some localities mandates that e-waste (anything with a plug, battery or cord)
is disposed of through controlled recycling facilities and must not be disposed of in general
household waste. For more information about recycling of electrical and battery operated
appliances, please contact your local council or your local household waste disposal service.