Russell Hobbs 18553, Инструкции и рецепты

Страница: 18 / 20

18
A IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
1 This attachment must only be used by or under the supervision of a responsible adult.
2 Use and store it out of reach of children.
3 Don’t put fingers into the feed tube.
4 Don’t use the attachment for any purpose other than those described in these instructions.
5 Don’t use the attachment if it’s damaged or malfunctions.
household use only
C ASSEMBLY
1 Push the shaft into the body.
2 The rear of the shaft should stick out about 16mm from the rear of the body.
3 Fit the screen you want (1-6).
4 The slot in the edge of the screen fits over the lug inside the front of the body.
5 Fit the ring nut to the front of the body and tighten it by hand.
6 Don’t use excessive force, you’ll damage the threads.
7 Open the front drive cover on the appliance.
8 Pull the catch down, and hold it there.
9 Push the rear of the body into the front drive on the appliance.
10 You may have to rotate it to fit the rear of the shaft into the drive.
11 When the drive is correctly located, rotate the body till the feed tube is vertical.
12 Release the catch – it should locate in the hole under the body rear.
C EXTRUDING
13 Roll fresh pasta into hazelnut-sized balls.
14 Plug the appliance into the wall socket (switch the socket on, if it’s switchable).
15 Run the motor at speed 1.
16 Drop a ball of pasta into the feed tube.
17 Wait till you see pasta coming out of the screen before adding another pasta ball.
18 After the first ball has passed through, you may raise the speed to 3.
19 Initially, the extruded pasta may curl. This will stop when enough weight is extruded to keep
it straight.
20 You may cut off the curly parts, roll them into a ball, and drop into the feed tube.
arm
feed tube
shaft
body
screens
ring
nut
cleaning tool
body
rear
to drive
hole
shaft
rear
16mm
slot
lug
front drive cover
catch
lug
2
3
4
5
6
1
spanner
beaker
500g
250g