Russell Hobbs 14773, Инструкция по эксплуатации, Страница: 3 / 8

3
6 Press and release the left button (
+
), to turn the display on – the reservoir will glow.
7 The display will show ACRYL at the bottom, and a single dot
•
in the dot settings.
8 Complicated? – not really, it’s just telling you what’s going on:
ACRYL this is the type of fabric (acrylic) associated with this temperature, the others
are (in ascending temperature order) NYLON, SILK, POLY (polyester), BLEND
(polyester/cotton), WOOL, COTTO (cotton), JEANS, and LINEN.
flash? The fabric type will flash till the iron reaches the correct temperature, then
it’ll glow steadily.
•
this is the traditional temperature dot setting, the range is
•
,
••
,
•••
MAX this is a bit higher than the traditional
•••
setting, for “difficult” fabrics
this flashes to show that you’re steaming
N
when this flashes, it means the iron hasn’t moved for a bit (30 seconds with
the soleplate down or on its side, 8 minutes upright) so it’s turned itself off
water saving – this stops the steam if the iron is motionless for 5 seconds, to
avoid soaking the fabric, and save water.
self clean – this symbol will flash after about 5 hours worth of steaming, to
let you know that you should use the self cleaning function to remove scale
build-up from the iron
off to turn the iron off, press and hold the
left button
– let it go when the
display disappears