RUSH Strobe CWL
TM
User Manual
9
Introduction
The RUSH Strobe CWL
TM
is a bright, compact LED linear strobe fixture with
ninety-nine Cree XP-D 3 watt LEDs and an output of 17 000 lumens. Its
reflector design gives a traditional Xenon strobe look. From a single flash to a
blinder effect, it is the perfect companion for mobile DJs, lounge bars, venues
and cruise ships. The fixture’s compact, lightweight design and increased
flexibility allow specification of multiple units in small- to large-scale
installations.
This versatile strobe can be operated using any DMX-compliant controller or
as a stand-alone unit in Show Mode. It provides a built-in microphone for
sound-triggered action, master/slave operation, and 12 pre-programmed
routines that synchronize dynamic effects among multiple fixtures.
The fixture is supplied with this user manual, a 1.5 m (5 ft.) power cable (local
power plug not included on some versions) and a mounting bracket.
Before using the product for the first time
1. Read ’Safety information’ on page 4 before installing, operating or
servicing the fixture.
2. Unpack and ensure that there is no transportation damage before using
the fixture. Never attempt to operate a damaged fixture.
3. If the fixture is not going to be hard-wired to an AC mains power source,
install a suitable local power plug (not supplied on some models) on the
end of the supplied power cable.
4. Before operating, ensure that the voltage and frequency of the local
power source match the power requirements of the fixture.
5. Check the RUSH support pages on the Martin Professional™ website at
www.martin.com for the most recent user documentation and technical
information about the fixture. RUSH by Martin™ user manual revisions
are identified by the revision letter at the bottom of the inside cover.
