background image

RUSH MH 3 Beam user manual 

7

 

 

Do not stick filters, masks or other materials onto any optical 
component. 

 

Lamp safety

 

Install only a lamp that is approved for use in the product. 

Prolonged exposure to an unshielded discharge lamp can cause 
eye and skin burns. Do not stare directly into the light output. 
Never look at an exposed lamp while it is lit. 

 

Do not operate the fixture with missing or damaged covers, 
shields, lenses or ultraviolet screens. 

 

A hot discharge lamp is under pressure and can explode without 
warning. Allow the fixture to cool for at least 2 hours and protect 
yourself with safety glasses and gloves before handling a lamp. 

 

Replace the lamp immediately if it becomes visually deformed, 
damaged or in any way defective. 

 

Monitor hours of lamp use and lamp intensity and replace the 
lamp when it reaches the limit of its service life as specified in 
this manual or by the lamp manufacturer. 

 

If the quartz envelope of a discharge lamp is broken, the lamp 
releases a small quantity of mercury and other toxic gases. If a 
discharge lamp explodes in a confined area, evacuate the area 
and ventilate it thoroughly. Wear nitrite gloves when handling a 
broken discharge lamp. Treat broken or used discharge lamps 
as hazardous waste and send to a specialist for disposal. 

 

Protection from injury

 

 

Do not look directly into the light beam. Do not point the beam in 
a direction where a person can look directly into it. Ensure that 
persons are not looking at the light beam when the product lights 
up suddenly. This can happen when power is applied, when the 
product receives a DMX signal, or when certain control menu 
items are selected. 

 

Do not look at the beam with magnifiers, telescopes, binoculars 
or similar optical instruments that may concentrate the light 
output. 

 

To minimize the risk of eye irritation or injury, disconnect the 
fixture from power at all times when the fixture is not in use, and 
provide well-lit conditions to reduce the pupil diameter of anyone 
working on or near the fixture. 

Содержание MH-3 Beam













































Отзывы: