Rush Gobo Projector 1, Руководство пользователя

Страница: 9 / 24

RUSH Gobo Projector 1
TM
User Manual 9
Introduction
The Rush Gobo Projector 1
TM
is a dynamic effect lamp that projects sharp
images from user-supplied glass or metal size-E gobos. It has a 20W LED
engine with long-life white LEDs.
The fixture is supplied with this user manual, a 1.9 m (6 ft.) power cable
(power plug not included with EU model), an adjustable mounting bracket /
floor stand, a “Welcome” gobo mounted in the gobo holder, and a spare gobo
holder.
Before using the product
1. Read ‘Safety information’ on page 5 before installing, operating or
servicing the fixture.
2. Unpack and ensure that there is no transportation damage before using
the fixture. Do not attempt to operate a damaged fixture.
3. If the fixture is not going to be hard-wired to a mains supply, install as
directed in this manual a local power plug (not supplied with EU model) on
the supplied power cable.
4. Before operating, ensure that the voltage and frequency of the power
supply match the power requirements of the fixture.
5. Check the RUSH support pages on the Martin
TM
website at
www.martin.com for the most recent user documentation and technical
information about the fixture. RUSH by Martin™ user manual revisions are
identified by the revision letter at the bottom of the inside cover.
Note that when the fixture is powered on for the first time, it may smoke slightly
as it warms up, but this will only last a few minutes and is no cause for
concern.