Rush Gobo Projector 1, Руководство пользователя

Страница: 6 / 24

RUSH Gobo Projector 1
TM
User Manual 6
Respect all locally applicable laws, codes and regulations when
installing, operating or servicing the fixture.
There are no user-serviceable parts inside the fixture. Do not
open it. Refer any service or repair operation not described in
this manual to an authorized Martin™ service technician. Do not
try to carry out any such operation yourself, as doing so may
present a health or safety risk. It may also cause damage or
malfunction and it may void your product warranty.
Install, operate and service RUSH by Martin™ products only as
directed in their user manuals, or you may create a safety
hazard or cause damage that is not covered by product
warranties.
Follow the safety precautions listed below and observe all
warnings in this manual and printed on the product. Keep this
user manual for future use. If you sell the product, give this
manual to the new owner.
For the latest user documentation and other information for this
and all Martin™ products, please visit the Martin website at
http://www.martin.com
Protection from electric shock
Do not expose the fixture to rain or moisture.
Disconnect the fixture from AC power before carrying out any
installation or maintenance work and when the fixture is not in
use.
Ensure that the fixture is electrically connected to ground (earth).
Use only a source of AC power that complies with local building
and electrical codes and has both overload and ground-fault
(earth-fault) protection.
Socket outlets or external power switches used to supply the
fixture with power must be located near the fixture and easily
accessible so that the fixture can easily be disconnected from
power.
Isolate the fixture from power immediately if the power plug or
any seal, cover, cable, or other component is damaged,
defective, deformed, wet or showing signs of overheating. Do
not reapply power until repairs have been completed