Rush Gobo Projector 1, Руководство пользователя

Страница: 11 / 24

RUSH Gobo Projector 1
TM
User Manual 11
AC power
Read ‘Safety information’ on page 5 before connecting the
fixture to AC mains power.
Warning! For protection from electric shock, the fixture
must be grounded (earthed). The power distribution circuit
must be equipped with a fuse or circuit breaker and ground-
fault (earth-fault) protection.
Socket outlets or external power switches used to supply the
fixture with power must be located near the fixture and easily
accessible so that the fixture can easily be disconnected from
power.
Connecting the fixture to a switched AC mains circuit provides a convenient
way to power the fixture on and off. Do not use an external dimming system to
supply power to the fixture, as this may cause damage to the fixture that is not
covered by the product warranty. The fixture can be hard-wired to a building
electrical installation or a power plug (not supplied with the EU model) that is
suitable for the local power outlets can be installed on the power cable.
If you install a power plug on the power cable, install a grounding type
(earthed) plug with integral cable grip that is rated minimum 250 V, 6 A. Follow
the plug manufacturer’s instructions and connect the wires in the power cable
as shown in this table:
Live or L Neutral or N
Earth, Ground or
US system Black White Green
EU system Brown Blue Yellow/green
The fixture has an auto-ranging power supply that accepts AC mains power at
100V~240V, 50/60Hz. Do not apply AC mains power at any other voltage or
frequency to the fixture.