35
Main Support no.: +370 5 2045030
Polish Support no.: +48 22 2092532
Ukrainian Support no.: +380 947 107319
[email protected] | www.ruptela.com
Standard rules for SMS alerts apply, described in “SMS command list” available at doc.ruptela.lt section 1.2.2
“SMS alerts with date & time”. The maximum custom SMS
text length is 50 symbols.
Note
Only GSM 03.38 symbols can be used in the custom SMS text.
4.3.3.2
Interfaces
Interfaces
section gives ability to enable or disable all of the device’s interfaces
. Different interface modes
and devices that can be connected to them are listed in 3.6 paragraph.
Port A
–
RS232 PortA.
Port B
–
RS232 PortB.
Port C
–
RS485 PortC.
J1708
–
for vehicle J1708 information reading.
Transparent channel
J1708 + DTC
–
for
diagnostic trouble codes (DTC) reading from J1708 data line.
More information and connection instructions available at our documentation
website.
Bellow you will find checkboxes for the K-Line, CAN and CAN2 interfaces.
K-Line
–
if you put a tick in the K-Line checkbox, then a dropdown list appears, where you can choose:
OBD
–
for
OBD parameters and diagnostic trouble codes (DTC) and reading.
