4.3.1
Global settings
The first part of the configuration tool is “Global” settings. Global include connection settings and other
settings independent from the profile settings – global settings are the same for all profiles.
Connection settings
here you should enter server IP and port that the device should connect to. The IP
can be entered in the numeric format: 255.255.255.255. You can also use a Domain name (not exceeding
40 characters). IP 2 is a backup IP address, which is used when the device is unable to connect to the first
server.
Note
Please have in mind that ports for TCP and UDP transfer protocols usually are different – please select the
correct transfer protocol and enter the correct port.
Two servers
–
checkbox changes the logic described above. It enables a two servers mode – the
same data is repeatedly transmitted to another server with IP2, unless we get a timeout. IP1 is
dedicated IP for server, from which we get the ACK’s for our record packets sent. After we get the
ACK from this IP, record data is considered as successfully transmitted to the server and it is
removed from the memory.
In this mode data is sent to IP2 only when connection to the IP1 is established. Packet, which is
sent to the IP1 server is also sent to the IP2 server.
Only records are going to be send to the IP2. Data packets such as Transparent Channel,
Tachograph, SD card, Garmin will not be send to the IP2.
Unable to send data:
When unable to establish connection to IP1, device does not connect to the IP2 as well. When
connected to IP1 and doing data transmission, but IP2 is unreachable – after receiving ACK from IP1
server, data is removed from memory, which can cause information loss in IP2 server.