Runco WindowWall, Руководство по установке

Страница: 84 / 196

Advanced Options
70 Runco WindowWall Installation Guide
Scheduling an Event
The most important event that can be “scheduled” for the Runco WindowWall is to
turn it on or off. Scheduling an automatic shut off time for the Runco WindowWall
helps ensure that Temporary Image Retention does not occur. The following events
can be scheduled:
• Turn unit off/on
• Set the clock ahead/back 1 hour
• Recall a memory slot
Use the following instructions to schedule an event.
1
Use the -/+ keys to select the “event number” you want to correspond to this
event.
2
Use the up/down arrows to select the Frequency line. Use the -/+ keys to scroll
through the list until you find the selection you want. The following frequencies
can be selected:
• One Time (e.g. to set clock ahead one hour in the spring)
• Daily (e.g. to turn the unit on/off )
• Weekly
Note: If you have set up a one time event, the frequency will show “Never” once the event
has occurred. You can schedule the event to occur again by changing the frequency back to
“One Time” and then correcting the date and time.
E v e n t # ( 0 = s e t c l o c k ) 1
F r e q u e n c y D a i l y
A c t i o n N o A c t i o n
S l o t t o R e c a l l 1
D a y o f We e k We d n e s d a y
Ye a r 2 0 0 7
M o n t h 0 2
D a t e i n M o n t h 2 8
H o u r 0
M i n u t e 0