manualshive.com logo in svg

Runco WindowWall, Руководство по установке

Поделиться
Скачать
Runco WindowWall Скачать руководство пользователя страница 7

Runco WindowWall Installation Guide

vii

Extended Service Options

Runco offers extended and expanded service plans. For information on additional product 
protection, please email 

[email protected]

 or call (toll free) 800-23-RUNCO (800-237-

8626).

Online Product Registration

Please visit 

http://www.runco.com/support/product-registration/

 to register product. 

Limitation of Implied Warranties 

RUNCO PROVIDES NO WARRANTIES, EXPRESS OR IMPLIED, EXCEPT THOSE EXPRESSLY 
PROVIDED HEREIN. RUNCO EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES, INCLUDING THE 
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 

Exclusion of Damages

RUNCO’S MAXIMUM AGGREGATE LIABILITY HEREUNDER IS LIMITED TO THE COST OF REPAIR 
OR REPLACEMENT OF THE PRODUCT. 

Exclusion of Damages (continued)

1 

RUNCO SHALL NOT BE LIABLE FOR DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECT 

IN THE PRODUCT, DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE OF THE 
PRODUCT, LOSS OF TIME, LOSS OF PROFITS, LOSS OF BUSINESS OPPORTUNITY, LOSS OF 
GOODWILL, INTERFERENCE WITH BUSINESS RELATIONSHIPS, OR OTHER COMMERCIAL 
LOSS, EVEN IF THE CUSTOMER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH 
DAMAGES.

2 

RUNCO SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, INDIRECT, SPECIAL, 

OR PUNITIVE DAMAGES ANY OTHER DAMAGES, WHETHER INCIDENTAL, INDIRECT, 
CONSEQUENTIAL OR OTHERWISE.

3 

SHALL NOT BE LIABLE FOR ANY CLAIM AGAINST THE CUSTOMER BY ANY OTHER PARTY. 

Effect of Local Law 

This warranty gives you specific legal rights, and you may have other rights, which vary from 
locality to locality. Some localities do not allow limitations on implied warranties and/or do 
not allow the exclusion of incidental or consequential damages, so the above limitations and 
exclusions may not apply to you. 

Содержание WindowWall





































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды