Runco Reflection CL-410, Руководство по эксплуатации для владельца

Страница: 47 / 57

47
Appendix: Maintenance
The projector lamp has a life of 2000 hours. Maintain proper ventilation to keep the
lamp operating throughout its lifetime. Do not subject the projector to unnecessary
vibration.
■
Lamp replacement is recommended after approximately 2,000 cumulative hours of
use or when you notice a significant deterioration in the picture and color quality.
The number of hours the lamp has been used can be checked in the Information:
Lamp Timer item in the Image Options menu.
■
For lamp replacement, please consult your nearest Runco authorized service center or
Runco dealer.
■
The actual lamp service life may be less than 2000 hours depending on the
environment in which the projector is used.
■
This projector uses a pressurized mercury lamp. A loud sound may indicate lamp
failure. Lamp failure is caused by excessive shock, improper cooling, surface
scratches or deterioration of the lamp due to usage. The period of time up to failure
largely varies depending on the individual lamp and the condition and the frequency
of use. It is important to note that failure can often result in the bulb cracking.
■
When the lamp replacement indicator and on-screen display icon are illuminated or
are flashing, replacing the lamp with a new one immediately is recommended, even
if the lamp appears to be operating normally.
■
If the lamp breaks, glass particles may spread inside the lamp cage or gas contained
in the lamp may be vented into the room from the exhaust vent. As the gas in
this lamp contains mercury, ventilate the room well if the lamp breaks and avoid
all exposure to the released gas. In case of exposure to the gas, consult a doctor
as soon as possible.
■
If the lamp breaks, there is also a possibility that glass particles may spread inside
the projector.
If this happens, contact your nearest Authorized Dealer to remove the damaged
lamp and ensure safe operation.
➤
Lamp Maintenance
CAUTION: Do not remove the lamp unit immediately after turning off the
projector. Touching a hot lamp can lead to burns or injury. Wait at least one
hour after the power cord is disconnected to allow the surface of the lamp
unit to fully cool before removing.
➤
Lamp Cautions
➤
Replacing the Lamp