Runco Reflection CL-410, Руководство по эксплуатации для владельца

Страница: 12 / 57

12
Using the Remote Control
Introduction
Available Range of the Remote Control
The remote control can be used to control the projector within the ranges shown in
the illustration.
When using the remote control:
• For best results, hold the remote control
within 23 ft. (7m) of the back or top sensor
and aligned within 30˚.
• Be sure not to drop the remote control or
expose it to moisture or high temperature.
• The remote control may malfunction under
a fluorescent lamp. If that occurs, move the
projector away from the fluorescent lamp.
Inserting the Batteries
Two AAA batteries are included in the
package.
1 Press down the tab on the cover and pull
the cover in the direction of the arrow.
2 Insert the included batteries making sure
the polarities correctly match the and
marks inside the battery compartment.
3 Insert the lower tab of the cover into the
opening, and press down the cover until
it clicks in place.
Note:
The signal from the remote control
can be reflected by the screen.