![Runco PlasmaWall XP-103DHD Скачать руководство пользователя страница 68](http://html1.mh-extra.com/html/runco/plasmawall-xp-103dhd/plasmawall-xp-103dhd_installation-and-operation-manual_1499983068.webp)
Operation
52
PlasmaWall XP Series Installation/Operation Manual
PRE
L
IMINAR
Y
Copy/Paste:
You can copy and paste settings from one memory location to another.
This gives you a convenient starting point for creating a new preset based on an existing
one, to make the calibration process less time-consuming.
For example, you can use the Copy/Paste feature to:
• Apply settings from HDMI 1 to HDMI 2, or from HD1 to HD2.
• Calibrate an input for 720p source signals, then use those settings for 1080i sources.
• Duplicate ISF Night settings for a given source and signal format and save them in the
Custom 1 memory preset.
To use this feature, select Copy/Paste from the Calibration menu.
• Copy Settings:
Select Copy Settings from the Copy/Paste menu to place the settings
for the current input source, signal format (resolution and frame rate) and memory
preset onto a “clipboard,” which is a temporary memory location. When you do, the
message “Settings Copied” briefly appears on-screen. The Copy/Paste menu then
re-appears, indicating the source of the copied settings.
• Paste Settings:
To apply the settings on the clipboard to a different input source,
signal format and/or memory preset, do
any or all
of the following:
• Switch to another DHD Controller input (for example, from HD1 to HD2).
• Change the output signal format at the source (for example, from 720p/60 to
1080i/60).
• Switch to another Memory Preset (for example, from ISF Night to Custom 1).
Then, select Paste Settings from the Copy/Paste menu.
If you want to keep these
new settings, you must save them!
(Refer to
Save ISF Night/Save ISF Day
on
page 51 or
Memory Presets
on page 47.)
Output Shift:
The controls in the Output Shift menu are similar to those in the Input
Position menu, except that they change the characteristics of the output signal. These
settings are saved independently
for each aspect ratio
.
Splash Configure:
Use the Splash Configure menu to control the appearance and
behavior of the “splash” screen that appears on the display upon power-up.
• Owner Name/ISF Calibrated/ISF Other:
You can have the PlasmaWall display the
owner’s name, your name, the phrase “ISF Calibrated” and/or any other string, up to
30 characters in length.
Use the up or down cursor button to select a character. Use the right and left cursor
buttons to change the cursor position. Press
MENU
when you have finished entering
text.
• Splash Timer:
When you turn on the PlasmaWall, it projects a welcome screen with
the Runco and ISF logos, along with the personalized information you enter as
described above. Select Splash Timer from the Splash Configure menu to set the
amount of time for which this screen appears. The range is from 5 to 60 seconds, in
one-second increments. Press
or
to set the timer, then press
MENU
.
• Splash Enable:
When you have finished customizing the splash screen, select Splash
Enable from the Splash Configure menu. Then, select On and press
ENTER
.
Copy/Paste
Copy Settings
Paste Settings
Copied From:
Input Source
HDMI 1
Signal Format
1080p/60
Memory Preset
ISF Night
Copied settings are not retained after a power cycle.
Note
Содержание PlasmaWall XP-103DHD
