background image

1. After powering on, press the WiFi/Mode Switch button,           the WiFi 

status lights (blue) blink when the WiFi is on and ready to connect.

2. In the wireless network of your smart phone, find the SSID connection of 

the RunCam 3 and enter the password. After the successful connection, the 

WiFi status lights (blue) will be constantly on.

Default SSID: RunCam3 _ ***** (* for letters or numbers)

Default WiFi password: 1234567890

App download: www.runcam.com

App function see table 1 : XXXXXXX

· APP

· 

Video

WiFi/Mode Switch Button

WiFi Status Light: Blue  

The camera will power on in Video mode (1080p@60fps)as the default mode.

With the card inserted, the camera status lights (blue)     are constantly 

on when the camera is in standby mode.

If the memory card is abnormal or missing, the camera status lights (blue) 

blink.

Normal Video:

Press the Power/Shutter button      , the camera starts 

recording, beeps once. The camera status lights blink every two seconds 

while recording.

Press the Power/Shutter button        , the camera stops recording, beeps 

twice, the camera status lights (blue) are constantly on. 

Time-lapse Video:

When the camera starts time-lapse recording, it beeps 

twice and the camera status lights blink every three seconds while recording.  

Video Features:

In the App and OSD you can set resolution, brightness, white 

balance and more advanced parameters.

Normal Video:

1080p@60fps, 1080p@30fps, 720p@120fps,720p@60fps 

and other resolutions are supported.

Time-lapse Video:

You can set the interval and duration of time-lapse in the App.

Video mode (blue)

Содержание RunCam 3









Отзывы: