RunCam Night Eagle 2 Pro, Руководство пользователя

Страница: 4 / 9

OSD Menu
· · Quick settings:
Long press the LEFT/DOWN/RIGHT button
for 2 seconds to activate the VOLTAGE/PILOT
/TIMER, then you can use the UP, DOWN,
LEFT and RIGHT buttons to move it to the
appropriate location on the screen, and press
the CENTER button to exit.
· The OSD displays by default the input voltage of
the camera. If the VBAT + cable is connected to
the battery's positive side, it displays the battery
voltage instead.
· · Press and hold the RIGHT button for 2 seconds
to select the voltage
· · Press and hold the CENTER button for 2 seconds,
the voltage starts to flash, now you can adjust the
Voltage:
· · Reduce (LEFT button) or increase (RIGHT button)
0.1V each press. Maximumadjustment range: ± 1v
· · After adjustment, press the CENTER button to
select the voltage, then press it again to save and
exit.
16.8v RunCam 01:08
· · Voltage Calibration