RUKO 1601PRO, Руководство пользователя

Страница: 32 / 36

Copyright ©2021 Ruko All Rights Reserved.
30
1601 PRO User Manual
11 Troubleshooting
Encounter obstacles or
interferences
Situation description Cause Solution
The remote-controlled car
cannot run straight
Wires are not attached
properly
Drive car on an unlevel surface
The steering range of the car
is small
The speed of the car is very slow
Reverse command not
responding
After starting the car, the car
automatically moves forward
or backward
After starting the car, the
wheels of the car rotate
automatically
During the car and remote
pairing process, accidentally
touch the throttle trigger
During the car and remote
pairing process, accidentally
move the steering wheel
Keep the fingers away from the throttle
trigger during the pairing process
DO NOT move the steering wheel during
the pairing process
When moving forward, need
to push twice to make the car
go in reverse
When the car is moving forward in order
to go in reverse :
first push on the throttle will bring the car
to a stop. The second throttle push will
make the car go in reverse
The speed has been set to the
minimum
Switch the speed with CH4 button
Steering range has been set
to the minimum
The front wheel hasn’ t been
adjusted to center position
Gyroscope adjustment action
frequency hasn't been setup
properly
Choose a smooth and flat surface to drive
Use the ST.TRIM knob to adjust the wheel
before operation
Use the ESP knob to adjust the gyroscope
adjustment action frequency according to
the car situation and operation surface
status
Adjust the steering range with the ST.D/R
knob
Please put the wire in the shell of
the car to avoid damage
Remove the battery and charge it
Replace with new batteries
Remove debris
Remote control car battery
low
There was signal interference Restart the car and transmitter
Transmitter or car low battery
Replace the batteries of the transmitter or
car
The wheel or transmission
shaft is entangled with
foreign matters
Stop operation for a few seconds
Avoid obstacles or interferences
Car will not pair with the
transmitter
Remote control car doesn't
work
Battery fell out
During operation, the wire is
exposed and rubs against the
ground
The battery clip is not fasten
Fasten the battery clip when install the
battery
Operation delay
Transmitter battery low