RUKO 1601PRO, Руководство пользователя

Страница: 12 / 36

1601 PRO User Manual
Copyright ©2021 Ruko All Rights Reserved.
10
The ESP function doesn't work when the remote control car goes in reverse.
When the remote control car is moving forward, to get the gyroscope works, it is
necessary to pull the throttle trigger more than 30%.
With the increase of car speed, the auto gyroscope adjustment frenquency is also
increases accordingly.
ESP function
This model is equipped with ESP car stabilization system which is assisted with gyroscope
sensor, it can effectively help correct the car attitude and direction during operation. The function
and sensitivity of the car gyroscope sensor can be adjusted through the ESP knob of the transmitter.
When the car can't drive in a straight line, please use the ESP knob to adjust the senstivity of gyroscope.
It is required to adjust the gyroscope adjustment action frequency according to the model situation
and operation surface status.
Steering trim
The ST.TRIM knob is used to adjust the front wheel position to center position, it can ensure the
car run in a straight line. Please adjust the wheel to center position before start the car. During the
operation, if the car can not drive in a straight line, please use the steering trim knob to adjust and
correct the left and right directions of the front wheels.
-ESP+
Decrease/increase the frenquency
of gyroscope adjustment action Decrease the adjustment
action frenquency Increase the adjustment
action frenquency
Steering trim
ST.TRIM
When the front wheel
is left, the knob rotates
to the right. When the front wheel
is right, the knob
rotates to the left.