Ruijie RG-S7800 Series, Руководство по установке оборудования

Страница: 30 / 62

Chapter 2 Modules S7800 SeriesHardware Installation Guide
8
Table 2-8 LEDs on the front panel
Sign Description Detailed Information
Status System LED
OFF: The module has not been powered on.
Red: The module is faulty.
Flashing green: The module is initializing; if it
keeps on flashing, the module is faulty.
Solid
green: The module has finished
initialization and can perform switching
normally.
Link/ACT Port LED
OFF: Port is not linked up.
Green: Port is linked up and the data will be
transmitted at the rate of 100Mbps.
Yellow: Port is linked up and the data will be
transmitted at the rate of 10Mbps/100Mbps.
Flashing green: The data is transmitted on the
port.
Note
RG-S7800 series switch provides the power management function. Upon
being inserted into the chassis or powering on the chassis, all RG-S7800
service cards are not powered on and all LEDs are OFF untill the CMs
’
control
over powering on the service cards based on the current power condition. It
takes approximately dozens of seconds to finish the whole process, please
wait.
2.6 M7800P-48GT
Figure 2-5 shows the basic appearance of M7800P-48GT, the line card of RG-S7800.
M7800P-48GT provides 48 1000M 10/100/1000M BASE-T ports, with each port providing up
to 15.4W external PoE power. The M7800P-48GT module is hot swappable.
Figure 2-5 Basic appearance of the M7800P-48GT
2.6.1 Technical Specifications
Table2-9 Technical specifications of M7800P-48GT
Product Model M7800P-48GT
Standard
Compliance
IEEE 802.3-2005
IEEE 802.3af
Port type 48 10/100/1000BASE-T copper RJ45 ports
Transmission
media
10/100/1000BASE-T: 100m(Category-5 twisted pairs)