Ruijie RG-EG Series Routers Hardware Installation and Reference Guide
Quick Configuration
4 Quick Configuration
4.1 Connecting Devices
Connecting to AP
1. Connect the AP device to the EG router via network cable.
2. Power on the devices.
3. The AP device broadcasts an SSID with a prefix starting with @Ruijie-m.
Connecting to PC
1. Connect the PC to the EG router via network cable.
2. Enable the PC to automatically obtain the IP address.
4.2 Power-on Startup
Checks before Power-on
Before power-on, perform the following checks on the router:
Whether the power cable and the ground wire are properly connected.
Whether the power voltage is consistent with the requirement of the router.
Whether the configuration cable is properly connected, and whether the microcomputer or terminal for device
configuration is started or configured.
Before powering on the router, be aware of the location of the power switch of the router to timely cut off power
supply in case of any accident.
Powering on the Router
Turn on the power supply switch of the router.
Checks after Power-on
After the router is powered on, check the following items:
Whether the LED indicators on the front panel of the router works normally.
Refer to the indicators in
Product Overview
.
Whether the Web-based system is available.
The default management IP address is http://192.168.110.1.
