Ruijie RG-AP180 Series, Руководство по установке и справочное руководство по оборудованию, Страница: 13 / 19

·
Hardware Installation and Reference Guide Installing the Access Point
Be sure that the equipment is installed in a place where it is easy to be observed.
1) Loosen screws on the 86-type faceplate that is mounted on the wall. (Skip this step if the faceplate has not been
mounted.)
Figure 3-1 Loosen Screws on the Faceplate
2) Connect the uplink cable to the UpLNK port.
Figure 3-2 Connect Cables to Ports
3) Align screw holes on both sides of the device over those on the faceplate. And then tighten screws with a
screwdriver.
Figure 3-3 Tighten Screws with a Screwdriver