Web-based Configuration Guide
Port Management
65
Parameter
Description
Default
Value
Monitor Direction
The type of packets (data flow direction) to be monitored by a source port.
Both: All packets passing through the port, including incoming
and outgoing packets
Incoming: All packets received by a source port are copied to
the destination port
Outcoming: All packets transmitted by a source port are copied
to the destination port
Both
Receive Pkt from
Non-Src Ports
It is applied to the destination port and indicates whether a destination
port forwards other packets while monitoring packets.
Enabled: While monitoring the packets of the source port, the
packets of other non-Src ports are normally forwarded
Disabled: Only monitor source port packets
Enable
4.5
Rate Limiting
Choose
Local Device
>
Ports
>
Rate Limiting
.
The
Rate Limiting
module allows you to configure traffic limits for ports, including rate limits for inbound and
outbound direction of ports.
1.
Rate Limiting Configuration
Click
Batch Edit
. In the displayed dialog box, select ports and enter the rate limits, and click
OK
. You must
configure at least the ingress rate or egress rate. After the configuration is completed, it will be displayed in the
list of port rate limiting rules.
