
·
Figure 3-13 Vertically Adjustable Antenna Angle (+60°)
(Recommended vertical adjustment range: 0° to 90°)
Connecting Cables
Connect UTP/STP to the LAN/PoE port on the AP. See Appendix A for supported wiring of twisted pairs.
By default, baud rate is set to 9600, data bit 8, parity none, stop bits 1 and flow control none on the console port
of the AP. The console port is used only when you want to configure the AP manually.
Avoid bending the cable to a small radius close to the connector.
Содержание RG-AP520(DA) Series
Страница 1: ...RG AP520 DA Series Access Point Hardware Installation and Reference Guide V1 0...
Страница 10: ...Half power beamwidth about 35 Half power beamwidth about 60...
Страница 29: ......