User
’
s Manual of RDC6442G(U)-DFM-RD Control System
SHENZHEN RUIDA TECHNOLOGY
31
:Set the min laser power of the current running layer,
:To start or pause the work;
:To move the X axes or the left/right cursor;
:To move the Y axes or the up/down cursor;
:The Z/U key can be pressed when the system is idle or the work is finished. On
pressing this key, it will show some entries in the interface, each entry includes some
functions, Z axes move, U axes move, each axes to go home etc.;
:To stop work, or to exit to some menu;
: Validate the change;
8.2 Introduction to the Main Interface
8.2.1 The main interface
When the system is powered on, the screen will show as below:
Min.
Power
Start/
Pause
Esc
Enter
