Ruida Technology RDC6445GZ, Руководство пользователя

Страница: 55 / 71

User
’
s Manual of RDC6445GZ Control System
SHENZHEN RUIDA TECHNOLOGY 50
The operation method is the same as manual setting.
When “Continue” item is selected, then the “Laser time” item is not valid, on that
time, push the Laser key to splash the enabled lasers, and when Laser key is loosed,
then the lasers will finish splashing. When the Laser mode item is “Manual”, then
pushing the Laser key one time, the enabled lasers will splash a fixed time.
8.7.5 Diagnose
Select the "Diagnose" entry under the funtions interface, press the <Enter>
button, and then pop up the interface as follows:
The interface displays the hardware IO information of the system, and reads the
hardware information of the system by pressing the <Enter> key. When the hardware
signal is triggered, the small box on the left side of the corresponding entry will show
red. Otherwise, it will show gray. Press the <Esc> key to return to the previous menu.
Figure 8.7.4
Figure 8.7.5