Miknetum MPR 500
19
5.3
Repairs and spare parts
As a damaged part on a machine is usually damaged due to causes
unrelated to the part, always carry out a fault diagnosis.
Contact our Service Hotline at +49 7748-523-11 for spare parts or
malfunctions. Please keep the machine type and number to hand.
6
Disposal
All materials and operating fuels must be separated and
disposed of in accordance with nationally applicable regu-
lations!
1.
The machine contains a cooling system filled with the refrig-
erant R452A. It must be pumped off by a refrigeration in-
staller and then disposed of correctly!
2.
The following components contain oil:
a.
Lid drive (lubricating grease)
b.
Tumbling arm drive
c.
Mixing arm drive
d.
Slewing gear
e.
Lifting aid drive
f.
Vacuum pump
g.
Compressor (cooling unit)
All gears/motors except for the compressor are equipped with
oil draining screws. The compressor must be drilled open for
draining the oil.
7
Technical documentation
7.1
Technical data
Supply voltage:
400 V 50/60 Hz 3-phase/N/PE
Power consumption:
8.8 kW
Full-load current:
18.1 A
