Cutting Centre SR 2 Turbo
3
1
Safety Instructions
!!! Observe the safety instructions during the installation, operation,
cleaning and maintenance of the Rühle Cutting Centre!
Hazard potentially causing irreversible injuries if disre-
garded.
Warning, potentially causing serious injuries if disre-
garded.
Note
Work on electrical equipment of the machine may only
be carried out by qualified technicians!
Always disconnect machine from the mains during this
process!
Warning of suspended load.
1.1
Safety instructions
!!! A supervisor (responsible person) must be appointed for the ma-
chine!
This person must:
a)
Completely read and understand these operating instructions
before transport, commissioning, setup, operation, cleaning,
decommissioning, care / maintenance as well as dismantling /
disposal!
b)
Prepare work instructions for the intended and safe
transport, commissioning, setup, operation, cleaning, decom-
missioning, care / maintenance as well as dismantling / dis-
posal!
c)
Make sure that the qualified workers have completely read
and understood the respective work instructions according to
section 1.1b!
