Cutting Centre SR 2 Turbo
8
2.1
Machine transport and setup
Please refer to the short instructions supplied with the machine re-
garding transport and setup of the cutting centre.
The machine and machine parts must be transported by 2
persons (1× operator of floor conveyor / 1x transport su-
pervision).
The power supply line must not be damaged by driving
over or pinching it!
The machine must be decommissioned until a damaged
power supply line has been repaired!
Make sure the machine is stable!
2.2
Workplace description
The work area around the machine is at least 0.5 m on all sides; for
maintenance work it is at least 1 m; if used as passage way, it is at
least 1.2 m.
Sw
ive
l r
an
ge
o
f
kn
ife
p
ro
te
cti
o
n
b
o
x
S
wi
v
e
l r
a
n
g
e
o
f
k
n
ife
p
ro
te
c
ti
o
n
box
