Federal Communications Commission Radio
Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
on his own expense.
CAUTION
This product contains a laser system and is classified as a
“CLASS 1 LASER PRODUCT”
CAUTION
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure. This product contains
no user serviceable parts. Attempted service by unauthorized personnel shall render
all warranties null and void.
Changes or modifications not expressly approved by RuggedCom Inc. could void the
user’s authority to operate the equipment.
Should this device require service see the “Warranty and Service” section of this
guide.
IMPORTANT
The RSG2100 family of products should be installed in a
restricted access location
where access can only be gained by service personnel or users who have been
instructed about the reasons for the restrictions applied to the location and about any
precautions that shall be taken; and access is through the use of a tool or lock and
key, or other means of security, and is controlled by the authority responsible for the
location.
