CardioWall
Compact Order and Installation Manual:
Installation Checklist
CardioWall
Compact -
Installation Checklist
© Rugged Interactive
2019
Check 4: Select Menu then select ClusterShot
(Standard / Ability CardioWalls only).
Time selection OK?
☐
Level selection OK?
☐
Program counts down from 3 and begins.
☐
All pods active and operational.
☐
Check all pods for colours: red, green, blue.
☐
Sounds can be heard when the lights are hit.
☐
Program plays as described in the Programs Guide.
☐
Check 5: Select Combat via Quick Start
(connected Compact Duo only).
“Play the other wall”
can be heard.
☐
Confirm ‘Combat’ program by selecting the Quick Start on the opposite wall.
☐
Program counts down from 3 and begins on both units simultaneously.
☐
Selection of a pod on one CardioWall causes a pod to light up on the opposite CardioWall.
☐
Sounds can be heard when the lights are hit.
☐
Program plays as described in the Programs Guide on both units.
☐
Celebration sounds can be heard from the ‘winning’ CardioWall.
☐
Disappointment sounds can be heard from the ‘losing’ CardioWall.
☐
Check 6: Ready for use.
Play area is clear.
☐
Instruction / training carried out by an appropriate instructor to all new users.
☐
If anything unexpected occurs or problems persist after troubleshooting, call Rugged Interactive
directly on +44 (0) 1726 833 882.
*
If no external volume control is provided (usual for most CardioWalls), the volume can be adjusted on the
main hub. The volume control (a small blue control) can be seen through the score window on the bottom
left of the PCB. The volume can be adjusted by projecting a tiny flat-bladed screwdriver through the
provided hole on the front of the graphics panel. Rotate clockwise for volume up, counter-clockwise for
volume down.
