CHARGING LAPTOP COMPUTERS
Step 1:
Locate the suitable connector for your laptop and
secure it to the end of the laptop charging cable. Be sure to
confirm the charging/output voltage required by consulting
the owners manual or original charging cable for your laptop
if you are unsure.
Step 2:
Insert the laptop charging cable into the laptop
charging port “OUTPUT” of the RG500.
Step 3:
Turn the RG500 to “ON”
(A)
, then press the “CIRCLE”
button
(B)
. Each short press of the “CIRCLE” button will
toggle the output voltage from 12V to 16V to 19V. Please
be sure that the correct output as determined in step 1 is
shown on the LCD display.
Step 4:
Insert the other end of the laptop charging cable into
your laptop charging port.
A
B
PAGE 6
