IMPORTANT:
The INTELLIBOOST sensor will not turn green until a draw is recognized. This is designed to ensure a proper
connection with no accidental power discharge.
Do not crank the engine for more than 4 seconds (continuously) while the unit is connected to the battery, as
this may cause damage to the jump starter.
Please read your vehicle’s owners manual prior to jump starting any vehicle to ensure that all safety
precautions regarding the vehicle have been followed.
While it may be possible to jumpstart a vehicle with a charge level below 60%, a much more powerful boost
is available at higher charge levels. Boosting with a charge below 40% is not advisable as it may cause harm
to the RG500 and void your warranty.
JUMPSTARTING A VEHICLE
60%
Step 1:
Make sure that your RG500 has at least a 60%
charge. The higher the charge level, the more available
boosting power.
Step 2:
Lift the rubber cover and plug the INTELLIBOOST
cables into the RG500.
Step 3:
Connect the Red Clamp to the positive “+” terminal
and the black clamp to the negative “-” terminal of the
battery of the vehicle needing a boost.
Step 5:
Remove the INTELLIBOOST cables from the battery
of the vehicle being boosted and then unplug them from the
booster. Ensure that the unit is turned off to save battery life.
Step 4:
Turn the vehicle ignition to the “ACC” (Accessory)
position for (2) seconds, or until the INTELLIBOOST indicator
light turns green. Then turn the ignition to “START” to start
the vehicle.
PAGE 4
