Bulldog Security RS79 Скачать руководство пользователя

Страница: 1 / 10

System Features ....................... 4

System Components ..................... 4

Required Tools ........................ 4

Technical Assistance................. 4-5

Before You Begin ...................... 5

Precautions...........................

Using your Test Probe.................. 6

Making Wiring Connections ............ 6-8

Locating & Making Connections ....... 8-12

Connecting the Wiring Harness ......... 13

Neutral Safety Switch................. 14

Operator Programming Instructions...... 15

How to use Your Remote Transmitter..... 16

Vehicle Anti-theft System Chart..... 17-20

FCC ID Notice ........................ 20

Important Functions................ 21-22

Warranty Validation .................. 21

Your Warranty ........................ 23

REMOTE STARTER • MODEL RS82I/RS85I/RS79

CONTENTS

Protected by one or more

of the following patents:

Patent #5,459,477 Patent #5,612,670

Patent #5,886,622 Patent #5,677,664

Patent #5,942,988 Patent #6,101,428

Patent #6,452,772

Other patents pending.

ATTENTION:

We urge you to immediately place this card in your wallet.

PLEASE FILL OUT THIS FORM

AND MAIL IT IN TO REGISTER YOUR WARRANTY

Your Name ________________________________________

Address ________________________________________

________________________________________

Email Address _________________________________

Dealer Name ____________________________________

Address ________________________________________

________________________________________

Date of Purchase ___/___/___ Model # __________

Make/Model of Car ______________________________

Year of Car _____ V.I.N. # ____________________

Final Quality Check By _________________________

WARRANTY VALIDATION

Mail to: JBS Technologies

225 Technology Way • Steubenville, Ohio 43952

PROGRAMMING FUNCTIONS

FOR YOUR WALLET OR GLOVE BOX

Adding Additional Remotes

The hood must be open or the hood pin wire must be grounded. Then,

press and hold Button #1 on the working transmitter for ten (10)

seconds or until the ignition relay clicks or the check engine

light flashes once, release Button #1. Press and release any button

on the new remote control. The ignition relay will click or the

check engine light will flash three (3) times. Close the hood or

remove the hood pin wire from ground and try both remotes.

Tach/Tachless Option The brake must be depressed.

Press and hold Button #1 for 5 seconds or until the ignition relay

clicks or the check engine light flashes once. Release. Press and

release Button #1, the ignition relay clicks or the check engine

light flashes once. The unit is now programmed for Tachless Mode.

Press and release Button #2, the ignition relay clicks or the check

engine light flashes twice. The unit is now programmed for Tach

Mode. NOTE: The factory setting is Tachless Mode.

Содержание RS79











Результаты поиска

Содержание RS79

Отзывы:

Похожие инструкции для RS79

Бренды по названию

Популярные бренды

Bulldog Security RS79, Инструкция по установке и эксплуатации

Результаты поиска

Содержание RS79

Отзывы:

Похожие инструкции для RS79

Бренды по названию

Популярные бренды