Rugged CCTV SCOUT III, Инструкция по эксплуатации

Страница: 22 / 28

IR Dome Camera Instruction Manual
21
⑤
. Delete a Tour
Move the joystick up/down to select Delete a Tour. Move
the joystick left/right or press OPEN to confirm. User will
use this function to delete the Vectorscan.
⑥
. Name Display
Move the joystick up/down to select Name Display. Joystick left/right to select OFF/ ON.
⑫
. Program VectorScan
Move the joystick up/down to select Program VectorScan. Move the joystick left/right or press
OPEN to enter the menu.
①
.Number (Range: 1
～
6 )
Move the joystick up/down to select Number option. Joystick left/right to select desired number.
②
.Program a VectorScan
Move the joystick up/down to select Program a VectorScan. Move the joystick left/right or press
OPEN to confirm and enter its submenu. Move the joystick randomly to move the cursor to the
position to be edited.
P
：
Preset position; T
：
Tour ; V
：
Vectorscan
<< Joystick left or right to select preset position and
press OPEN to confirm. Joystick left or right again to
select numbers (0~9). Press OPEN to confirm the
selection.Press CLOSE to exit or return to upper
stage menu when programming is done.
<<Joystick left/right to select desired speed and press OPEN to confirm.
<< Press OPEN to confirm the selection. Joystick left
or right again to select numbers (0~9). Press OPEN to
confirm the selection.Press CLOSE to exit or return to
upper stage menu when programming is done.
Press OPEN or
joystick left/right
Press CLOSE
Are you sure to do this?
IRIS OPEN to Confirm
IRIS CLOSE to Cancel
P/V/T
1
～
165
255
0123456789
IRIS CLOSE When Done
1
～
9
Program VectorScan 1
name num v dwell
1.
2.
3.
4.
5.
16
IRIS CLOSE When Done
Program VectorScan
1. Number 1
2. Program a VectorScan
3. Run a VectorScan
4. Delete a VectorScan
IRIS CLOSE to Exit
num
v
dwell
1
～
99
55
0123456789
IRIS CLOSE When Done
name
Function Programming
1 PTZ Tour
2 Program VectorScan
3 Program Alarms(NA)
4 Mask Zone(NA)
IRIS CLOSE to Exit