LR-3510
Stock No. 1656589
Page 9 of 9
SECTION G -- OPERATION
:
Single Acting Hoist Operation:
To insure long service and safety from your hoist, it is important that the following procedures be
followed every time the hoist is operated.
1.
To raise the hoist, push in the "
up
" button on the control station. This will start the pump and
raise the box.
2.
When the hoist reaches full extension, the pump will bypass. Care should be taken not to let
the pump bypass for long periods of time, for this will put stress on the whole hydraulic and
electrical system. To stop the pump from bypassing release the "
up
" button on the control
station.
3.
To lower the hoist, simply push the "
down
" button in on the control station. This will activate
the pump and start the hoist down. To stop the hoist from lowering, simply release the
"
down
" button. The hoist will stop lowering and hold its position.
Double Acting Hoist Operation:
CAUTION:
To insure long service and safety from your hoist, it is important that the following procedure
be followed every time the hoist is operated.
1.
To raise the hoist, push in the control station button marked "
up
". This will activate the pump.
2.
When the hoist has reached its full extension, the pump will bypass. Care should be taken not
to allow the pump to bypass for long periods of time for this will put stress on the entire
hydraulic system. To stop the pump from bypassing, release the "
up
" button on the control
station.
3.
To lower the hoist, push the control station button marked "
down
". This will activate the
pump and start the hoist down. Hold the button down until the pump bypasses and then
release this button. This will lock the truck body against the truck frame.
WARNING:
Anytime the hoist or truck body is worked on with the truck body in a raised position, be sure
the unloaded body is properly blocked with the body prop or body props.
©2001 Rugby Manufacturing Co.
