LR-3510
Stock No. 1656589
Page 6 of 9
2.
Drill four 13/32" dia. holes through the chassis frame and the pump bracket. Fasten with four
3/8" x 1 1/4" hex cap screws, four 3/8" lock washers and four 3/8" hex nuts. (Fig. #5).
IMPORTANT
:
To maintain chassis frame strength, keep all four 13/32" dia. holes within the middle
third of the frame web (Fig. #5).
IMPORTANT:
To install the pump, refer to the pump installation manual included with the pump
package.
SECTION E - BODY INSTALLATION:
1.
Slide a lock collar onto each lifting
shaft. Slide a lifting shaft with
collar into each end of the hoist
lifting tube (Fig. #6).
2.
Position the body with the long
beams (just long beams if they are
separate from the body) onto the
truck frame.
NOTE
:
A clearance of at least 2" is
required between the truck cab and
the closest point on the truck body.
The LR-3510 has a mounting
height of 5".
