WARNINGS:
Warning:
Not installing or operating equipment correctly can cause component damage or an accident
which may cause injury or death. "
Always
" install and operate equipment in accordance with
manufacturer's instructions. Read and understand this manual fully before proceeding.
Warning:
Welding, oxy-fuel cutting, or grinding sparks can cause fuel to ignite which in turn can lead
to injury or death. "
Always
" take adequate steps to avoid ignition of fuel from fuel tanks
when welding, grinding, or oxy-fuel cutting during equipment installation.
Warning:
Heat from the truck's exhaust system can cause hydraulic component failure and may lead to
a fire which could cause injury or death. "
Always
" install equipment in locations where heat
from the exhaust system will not damage any hydraulic component.
Warning:
Being under a raised body can result in serious injury or death should the body inadvertently
descend. "
Never
" position yourself or allow others to position themselves under a "
loaded
"
body. "
Always
" prop the "
unloaded
" body up using the body prop or body props supplied.
"
Remember
" body props are to be used only on an "
unloaded
" body.
Warning:
Malfunctioning equipment can cause property damage, injury or death. "
Always
" have faulty
equipment repaired before continuing its use. If required, consult the manufacturer.
Warning:
Overloading of a truck can cause truck component damage or an accident which may cause
injury or death. "
Never
" exceed the gross vehicle weight (GVW) or the gross axle weight
(GAW) rating of your vehicle.
Warning:
The inadvertent shorting of the truck's electrical supply can cause a fire or equipment damage
that could lead to injury or death. "
Always
" disconnect the vehicle battery prior to installing,
servicing or repairing the pump.
Warning:
Never install a cable on a truck while the body is raised without first blocking, bracing, or
propping the body up to prevent the body from inadvertently falling when the control valve
lever is moved. A falling body will result in serious injury or death if the control valve lever is
moved while someone is under the non-supported body.
Warning:
Damage to brake lines during equipment installation, or installing bolts or equipment in such
a way that the line will rub and become damaged can lead to brake failure which can cause an
accident and can lead to severe injury or death.
"Always"
take adequate steps to prevent
brake line damage during installation and isolate brake lines from installed equipment.
Warning:
To prevent damage to the truck's electrical system, disconnect the positive battery cable and
alternator when arc welding on the truck.
LR-3510
Stock No. 1656589
Page 2 of 9
