page 6 of 18
Server Rack Installation
ZoneDirector 5000 is a 2U form factor server designed for mounting in a standard EIA
19” server rack. The enclosed mounting hardware supports mounting on racks 22.5”
to 32.5” deep. For racks of depth less than 22.5”, use rack mount kit TMLCMOUNT21
(available at Avnet, manufactured by Kontron). Before installing the ZoneDirector
5000 in a server rack, please examine the package contents to ensure that all parts are
included and ensure that you have prepared the required hardware and tools.
Required Hardware and Tools
One Phillips screwdriver
•
One flat head screwdriver
•
One standard EIA 19” server rack, with an available 2RU rack space
•
12 server rack screws or fasteners (specific to your server rack)
•
Unpacking the Rack Mount Kit
Unpack your rack mount kit and identify each item.
Package Contents
A complete rack mount installation kit includes all of the items listed below:
NOTE: This kit includes two sets of 8-32 x 1/2” screws. One set of eight has a
L
larger screw head size than the second set of eight. Use the set of 8-32 x 1/2”
screws that best fits the rack in which you are installing the rail kit.
Outer rail slide assembly (see A in Figure 1)
•
Inner rail slide assembly (see B in Figure 1)
•
Plastic bag #1, which contains the following items:
•
Four hex head shoulder screws (see A in Figure 4)
•
Two rack mounting ears (see A in Figure 7)
•
Two #10-32 x 3/8” screws (see B in Figure 7)
•
Plastic bag #2, which contains the following items:
•
Outer slide rail screws, 8 #8-32 x 1/2 (see D in Figure 1)
•
Inner slide rail screws, 8 #6-32 x 1/4 (see D in Figure 1)
•
Rack screws, 2 #8-32 x 3/4 (see D in Figure 1)
•
This Rack Mount Installation Guide
•