Ruckus Wireless ZoneDirector User Guide | Managing User and Guest Access
46
land on the redirected page(s), they are shown the expiration time for their guest
pass.
5
Click
Apply
to save your settings.
Managing Guest Pass Access
By default, all of your users are allowed to issue temporary “day use” guest passes for visi-
tors and contractors. Such a guest pass allows its user to connect to the WLAN.
You must decide whether or not to permit all—or some—users to generate guest passes.
Additionally, you may also want to review the default settings and policies that control
guest-pass use of the network. There are options you can fine-tune to fit your work environ-
ment.
Activating guest pass access in ZoneDirector
1
Go to
Configuration
>
Guest Access
.
The
Guest Access
page appears.
2
Scroll down to
Guest Access > Guest Pass Generation
.
FIGURE 4-6
3
If you require a specific authentication server, toggle the
Authentication Server
drop-
down list to select the appropriate server.
4
Set the guest pass expiration parameters by selecting the radio button by either of the
following:
•
Guest Pass will expire in the amount of time specified after it is issued
: This
type of guest-pass is valid from the time it is first created to the specified expira-
tion time, even if it is not being used by any end user.
•
Guest Pass will expire in the amount of time specified after it is first used
: This
type of guest pass is valid from the time the user uses it to authenticate to the
ZoneDirector until the specified expiration time. An additional parameter (
A Guest
Pass will expire in X days
) can be configured to specify when an unused guest pass
will expire regardless of use. The default is 7 days.
5
When you are finished, click
Apply
to save your settings and make this new policy
active.
