background image

F Ü R   F U S S   U N D   P F L E G E

F Ü R   F U S S   U N D   P F L E G E

Operating Instructions PODOLOG

®

 MOON | Rev. 1

PODOLOG

®

 MOON PROFESSIONAL | PRODUCT DESCRIPTION

7

|

 

1.11

1.12

1.14 /1.15

1.16

1.17

1.18

1.10b 

FOOT SWITCH PLUG CONNECTOR

 

1.11 

HAND SWITCH (optional)

 

1.12  

BACK INCLINATION – PATIENT SWITCH 
(optional)

1.13 

TRIGGER FOR GAS PRESSURE SPRINGS

1.14  

ELECTRICAL HEIGHT ADJUSTMENT FOR 
FOOT SUPPORT  (optional)

1.15  

MAGNETIC SWITCH FOR FOOT 
SUPPORT EXTENSION (optional)

 

1.16 

HEIGHT ADJUSTMENT 

 

ELEMENT CLADDING

1.17 

FLOOR PLATE

1.18 

MAINS CABLE

 

1.19 

TRANSPORT LOCK

  

The PODOLOG

®

 MOON PROFESSIONAL treatment chair is equipped with up to fi ve electric motors. 

The motors can be activated individually or via the memory buttons. A separate motor is used for ad-
justment of the seat section and back section, as well as the height adjustment. The treatment chair 
can be rotated manually and the leg supports can be adjusted via gas pressure springs, or optionally 
they can be adjusted via electric drives. The foot supports can be fi xed in place via clamp levers or 
optionally via magnetic switches.

1.13

1.19

Содержание Podolog Moon Master





















































Отзывы: